| 1. | Radial velocity curve
视向速度曲线 |
| 2. | Vertical velocity curve
竖向临曲线 |
| 3. | Zero velocity curve
零速度线 |
| 4. | Based on the analysis of the current lift velocity curve , sine curve was used as the ideal velocity curve of the system
文中还在对各种电梯运行曲线进行分析比较的基础上，把正弦曲线作为adcm的理想速度曲线。 |
| 5. | By using the software , we can get a optimum velocity curve and other curves , check up the parameters of train and line whether or not satisfy the running require
通过这个软件，可以得到一条优化的列车运行速度等其他曲线，同时可检验线路、车辆的设计参数是否满足运营要求。 |
| 6. | Comparison of these two methods was completed by comparing the displacement curve and the velocity curve . strongpoint and demerit of each method were concluded
通过几次试验的对比分析,其中包括目标弹的位移曲线和速度曲线的对比,充分证明了两种方法的可行性并指出各自的优缺点。 |
| 7. | The growth velocity curve of height was multi - humped . the effect of water on height increase was significant , fertilizer could boost in tillering but influenced not markedly on height
水分对株高的增加影响较大，施肥对芨芨草株高的增加有影响，差异不甚明显，但对分蘖有较强的促进作用。 |
| 8. | In the first part of this page , it discussed some problems of how to planning the velocity curve of train . these problems include : characteristic of line , guideline index of train design , and guideline index of comfort
本文首先讨论了规划列车运行速度曲线有关的问题，这些问题包括：线路特性、列车相关设计指标、运营时的舒适度指标。 |
| 9. | The virtual robot model is built using pro / e and then the model is transferred to adams using m / pro . two representative robot work mode are simulated and the paper gives the joint angle curves and joint velocity curves
用pro / e软件建立机器人的虚拟三维装配模型,利用pro / e和adams之间的无缝连接软件m / pro将pro / e里的模型导入adams软件中。 |
| 10. | The curve of accelerating and decelerating can reflect the test curve well . 4 . the paper analyses the steady - state control when afterburning and gives the height - velocity curve which gets under the control law that fuel retain as constant . 5
第三，对其过渡态控制过程进行了分析研究，给出了按相似参数加速的供油控制规律，并进行了仿真；给出了减速过程的主燃油控制规律并进行了仿真。 |
